塑料熱成型機CE認證- EN *2*09:2008+A*:20**詳解-MD
上海郜盟專業CE認證為您解讀
*、塑料熱成型機歐盟CE認證指令
MD機械指令:200*/*2/EC
2、塑料熱成型機歐盟CE認證尺度:
EN ISO *2*00:20*0 機械平安 - 用于設想的一般原則-風險評估及風險降低
EN *020*-*:20*8 機械平安.機械電氣設備.第*部門:一般要求
EN *2*09:2008+A*:20** Plastics and rubber machines - Thermoforming machines - Safety requirements塑料和橡膠機械.熱成型機.平安要求
*、EN *2*09:2008+A*:20**適用范疇:
This European Standard deals with all significant hazards, hazardous situations and events relevant to thermoforming machines for continuous sheet and single sheets of thermoplastics materials, when they are used as intended and under conditions of misuse which are foreseeable by the manufacturer (see Clause *). A thermoforming machine may consist of a forming unit or a forming unit linked to one or more additional units. This standard covers the following units: continuous sheet unwind unit; single sheet feed unit; material intake; conveying equipment; heating unit; preheating unit; edge heating unit; component feeding/inserting unit; forming station; finishing station; stacking station; discharge station; residual sheet winding unit; sheet cutting unit. This European standard does not apply to units mounted upstream or downstream of the thermoforming machine: which have a separate control system; and/or are located separately. NOTE * This European Standard specifies requirements for machines supplied as a single forming unit or a number of units designed to operate as a single machine. Additional units that may be introduced at a later stage should be considered separately applying relevant standards and taking into account any hazards arising through their interaction with the thermoforming machine. This European Standard does not apply to units which are integrated into form, fill and seal machines. These are covered in EN ***-*:*999. This European standard does not apply to units which incorporate heating systems which are fuelled by gas. NOTE 2 Thermoforming machines generally do not create explosive atmospheres. In principle they therefore correspond with line F of Table 2 of the ATEX Guideline and consequently do not fall within the scope of Directive 9*/9/EC. This European Standard is not applicable to thermoforming machines which are manufactured before the date of its publication as EN. 上海郜盟提醒您,本歐洲尺度涉及與熱塑性塑料持續片材和單張片材的熱成型機相關的所有嚴重危險、危險情況和事務,當它們按預期利用時,以及在造造商可預見的誤用情況下(見第*條)。熱成型機可包羅成型單位或毗連到一個或多個附加單位的成型單位。本尺度包羅以下安裝:持續片材放卷安裝;單張紙進給單位;質料攝入;輸送設備;加熱單位;預熱安裝;邊沿加熱單位;部件進給/插入單位;成型工位;起點站;堆垛站;排放站;殘紙纏繞安裝;片材切割單位。本歐洲尺度不適用于安拆在熱成型機上游或下流的安裝:其具有零丁的控造系統;和/或零丁定位。注*:本歐洲尺度規定了做為單個成型安裝或設想為做為單個機器運行的多個安裝供給的機器的要求。后期可能引入的其他安裝應零丁考慮,應用相關尺度,并考慮到與熱成型機彼此感化產生的任何危險。本歐洲尺度不適用于集成在成型、填充和密封機器中的安裝。EN ***-*:*999中涵蓋了那些內容。本歐洲尺度不適用于包羅燃氣加熱系統的安裝。注2:熱成型機凡是不會產生爆炸性情況。原則上,它們契合ATEX指南表2的F行,因而不屬于指令9*/9/EC的范疇。本歐洲尺度不適用于在其發布為EN之前造造的熱成型機。
*、EN *2*09:2008+A*:20** 歐盟CE認證測試、查抄項目
上海郜盟,專業CE認證手藝辦事公司,努力于吉印通全球化辦事!供給權勢巨子CE認證機構-歐盟通知布告號機構機械設備CE認證辦事,高效可靠!
未經允許不得轉載!